単一光子測定器

COUNT & COUNTblue Series

NEW !
◆ ダークカウント 10 cps モデル登場
◆ 検出効率 > 70 %(COUNT), > 60 %(COUNTblue, 青色領域), > 65 %(COUNTblue, 緑/黄色領域)
◆ FC ファイバコネクタ(オプション)
◆ +12 V DC 単相電源駆動
◆ 短納期: メーカー在庫有り
◆ 低価格
◆ アプリケーション: コンフォーカル顕微鏡、粒子サイジング、蛍光分析、LIDAR、天文学

spec

単一光子測定器

Laser Components 社の COUNT シリーズは、高い量子効率とワイドダイナミックレンジを併せ持つ使い易い単一光子測定器です。Laser Components 社の 超低ノイズ VLoK シリコン アバランシェフォトダイオード と、PicoQuant 社特注のクエンチング&シグナルプロセス エレクトロニクスを組合わせています。COUNT シリーズでは 400〜1100 nm、COUNTblue シリーズでは 350〜1000 nm の単一光子を検出できます。
モジュールに向かってくるフォトンから発生する相応の電子パルスを TTL 出力として読み出します。ゲート関数により測定中の偶発的な過電圧からモジュールを保護します。
オプションの FC コネクタを利用すれば、サンプルとモジュールマルチモードファイバ接続することもできます。タイミング分解能の最適化もオプションにて承ります。

 
単一光子測定器 特性表
Model COUNT COUNTblue
-20C -50C -100C -250C -10B -20B -50B -100B -250B
Datasheet Downloads Click HERE !(347.0KB) Click HERE !(305.3KB)
● Technical Specifications for Count Module
Spectral Range 400〜1100 nm 350〜1000 nm
Dark Count Rate(count/s) 20 50 100 250 10 20 50 100 250
Photon Detection
Efficiency Pd:
@ 405 nm 5 %(min.), 15 %(typ.) 50 %(min.), 55 %(typ.)
@ 532 nm - 60 %(min.), 70 %(typ.)
@ 670 nm 60 %(min.), 70 %(typ.) 50 %(min.), 55 %(typ.)
@ 810 nm 40 %(min.), 50 %(typ.) -
Pd Vatiation
at Constant Temperature
TBC
Active Area Diameter 100 μm, norminal (typ.) *1
Timing Resolution 800 ps(typ.) *2
Afterpulsing Probability 0.5 %(typ.) *3
Dead Time 47 ns(min.), 55 ns(typ.)
Gating Input
Voltage:
Gating On = Disable Module; TTL low(< 0.5 V)
Gating Off = Enable Module; TTL high(> 2.4 V)
Gating Input
Response Time:
Gating On = Disable Module; 20 ns(typ.), 40 ns(max.)
Gating Off = Enable Module; 85 ns(typ.), 100 ns(max.)
TTL Output Pulse Length 25 ns(typ.)
TTL Output Pulse Amplitude 3 V(typ.), into 50Ω
Delay between Photon
Impact and TTL Pulse
50 ns(typ.)
Supply Voltage 11.5 V(min.), 12.0 Vtyp.), 12.5 V(max.)
Supply Current Switch On 1.5 A(typ.), Opration at 1 Mcps 0.2 A(typ.)
● Absolute Maximum Ratings
Supply Voltage 11.5 V(min.), 12.0 Vtyp.), 12.5 V(max.)
Operating Temperature 10〜40 ℃
Storage Temperature -20 to 70 ℃
Count Rate 5 MCounts/s(max.)
NOTE:
*1 The active area of the integrated Si-APD is larger than 100 μm. The FC-version is optimised for optical fibers eith core diameter < 105 μm. The pre-aligned GRIN lens focuses the light onto a spot of < 70 μm diameter in the nenter of the detector.
*2 Timing resolution depends on count rate and wavelength. modules specifically optimised for timing resolution are also available.
*3 Defined for a time interval of 4 μs.

*仕様は予告なく変更になる場合がございます。
標準価格: お問合せにより (株)インデコの営業部 から回答致します。

Copyright(c) Laser Components GmbH., 2011