サーモエレクトリック パワー発生モジュール

Thermoelectric Modules for Power Generation

◆ 輸送（自動車、船）における廃熱利用
◆ ウォーターボイラーやゴミ処理施設における
自律的エネルギー循環
◆ パイプラインの防食被覆
◆ 天然の熱リソースを電気エネルギーへ変換
◆ 低電力 電子デバイスの自律的パワーサプライ

Kryotherm 社のサーモエレクトリック パワー発生モジュールは、熱エネルギーを電気エネルギーに変換する、クリーンな電気エネルギー発生モジュールです。

Type	Geometrical Dimensions, mm			Rinternal *2	Rinternal o *2	Rheat *2	U	I	P	Effici- ency
	A	B	H	Ω	Ω	K/W	V	A	W	%
● Cold Side = 50 ℃, Hot Side = 150 ℃
TGM-127-1.0-0.8	30	30	3.1	2.41	1.18	1.4	1.83	0.76	1.38	2.3
TGM-127-1.0-1.3	30	30	3.6	3.92	1.92	2.27	2.18	0.56	1.21	2.7
TGM-127-1.0-2.5	30	30	4.3	7.53	3.69	4.36	2.55	0.34	0.86	3.2
TGM-127-1.4-1.5	40	40	3.9	2.46	1.21	1.43	2.25	0.91	2.05	2.8
TGM-127-1.4-2.5	40	40	4.8	3.84	1.88	2.23	2.5	0.65	1.63	3.2
TGM-199-1.4-0.8	40	40	3.2	1.93	0.94	0.45	2.19	1.14	2.49	1.8
TGM-199-1.4-1.2	40	40	3.6	2.89	1.42	0.68	2.69	0.93	2.5	2.2
TGM-199-1.4-1.5	40	40	3.9	3.85	1.89	0.91	3.03	0.79	2.39	2.4
TGM-287-1.0-1.3	40	40	3.6	8.85	3.84	1	4.54	0.51	2.33	2.5
TGM-287-1.0-1.5	40	40	3.8	10.2	4.72	1.16	4.77	0.47	2.23	2.7
TGM-287-1.0-2.5	40	40	4.8	17	7.38	1.93	5.49	0.32	1.77	3.1
● Cold Side = 100 ℃, Hot Side = 200 ℃
TGM-127-1.0-0.8	30	30	3.1	2.51	1.18	1.36	1.73	0.69	1.19	2
TGM-127-1.0-1.3	30	30	3.6	4.07	1.92	2.21	2.07	0.51	1.05	2.4
TGM-127-1.0-2.5	30	30	4.3	7.84	3.69	4.26	2.43	0.31	0.75	2.8
TGM-127-1.4-1.5	40	40	3.9	2.56	1.21	1.39	2.13	0.83	1.78	2.4
TGM-127-1.4-2.5	40	40	4.8	4	1.88	2.17	2.38	0.6	1.42	2.7
TGM-199-1.4-0.8	40	40	3.2	2	0.94	0.44	2.07	1.03	2.14	1.5
TGM-199-1.4-1.2	40	40	3.6	3.01	1.42	0.67	2.55	0.85	2.16	1.9
TGM-199-1.4-1.5	40	40	3.9	4.01	1.89	0.89	2.88	0.72	2.06	2.1
TGM-287-1.0-1.3	40	40	3.6	9.21	3.84	0.98	4.3	0.47	2.01	2.2
TGM-287-1.0-1.5	40	40	3.8	10.6	4.72	1.13	4.52	0.43	1.93	2.3
TGM-287-1.0-2.5	40	40	4.8	17.7	7.38	1.88	5.22	0.29	1.54	2.6
● Cold Side = 50 ℃, Hot Side = 300 ℃
TGM-31-2.8-3.5 HT(300) *3	40	40	6.5	-	0.2	-	1.2	2.35	2.8	-

NOTE：
*1 An universal abbreviation is used to notate generating modules: TGM-N-C-h, where:
　 TGM - product abbreviation - thermoelectric generating module;
　 N - number of thermocouples in the module;
　 C - length of the rib of the thermoelectric element basis (in millimeters);
　 h - height of the thermoelectric element (in millimeters)
For example, in the module TGM-127-1.0-2.5: 127 thermocouples (254 thermoelectric elements), every element has the cross-section of 1.0×1.0 mm and is 2.5 mm high.
*2 Rinternal - electrical resistance in operating conditions; Rinternal о - electrical resistance, t = 22 ℃ on both sides; Rheat - heat resistance.
*3 Important ! This type of TGM does not satisfy ROHS requirements.
* Application recommendations:
　 1. Generating modules (TGM) must be installed on flat surface.
　This requirement is especially vital for the cold side of TGM.
　The purity of surface processing on which TGM is installed must be better than 20 μm.
　 2. The pressing force must be not less than 12〜15 kg/cm²
　 3. Temperature of the hot seam shall not exceed 200 ℃
* 【Attention !】 During the exploitation of TGM with the decrease of electric load an increase of the hot seam temperature up to 5% off the difference between hot and cold sides of the module can follow.

＊仕様は予告なく変更になる場合がございます。

---

Copyright（c） Kryotherm, 1992-2010