532 nm レーザモジュール
GLM Series◆ ACC or APC 駆動タイプ
◆ 波長： 532 nm
◆ 出力： 1〜20 mW
◆ 空冷
◆ OEM 対応 小型モジュール設計
HC Photonics 社の GLM シリーズは 532 nm 出力の小型レーザモジュールです。
GLM-1221
シリーズはコリメーション無し、GLM-1236 シリーズはコリメーション付きのモデルです。いずれも ACC 駆動タイプと、PD モニタにより LD 出力を一定に保つ APC 駆動タイプをご用意しております。GLM-2060 シリーズはヒートシンク付です。
532 nm レーザ・セレクションガイド（1〜50 mW）
100 mW
以上の出力をお求めの場合は、GLMP シリーズ をご利用ください。
| ● GLM-1221 Series | ||||
| Model | GLM-1221-01A | GLM-1221-05A | GLM-1221-10A | GLM-1221-20A |
| Type | 3 extended pins from LD, No collimation, No PCB, Brass housing only. | |||
| Wavelength | 532 nm | |||
| Output Power | 1 mW | 5 mW | 10 mW | 20 mW |
| Lifetime | > 3000 hrs. | |||
| Beam Mode | TEM00 | |||
| Beam Divergence | < 12 mrad | |||
| Beam Diameter | < 1 mm at aperture | |||
| Operating Temperature | 20〜30 ℃ | |||
| Cooling | contact to heatsink by customer | |||
| Line Width（FWHM） | < 0.2 nm | |||
| Warm Up Time | < 3 sec. | |||
| Operating Voltage | 1.8〜2.2 V | |||
| Operating Current | < 300 mA | < 300 mA | < 300 mA | < 600 mA |
| Dimension | Brass Housing; 12 ±0.0/-0.1 mm（φ） x 21±0.5 mm（L） | |||
| Model | GLM-1221-01PD | GLM-1221-05PD | GLM-1221-10PD | |
| Type | 3 extended pins from LD, No collimation, No PCB, PD inside, Brass housing only + 2 PD wires |
|||
| Wavelength | 532 nm | |||
| Output Power | 1 mW | 5 mW | 10 mW | |
| Lifetime | > 3000 hrs. | |||
| Beam Mode | TEM00 | |||
| Beam Divergence | < 12 mrad | |||
| Beam Diameter | < 1 mm at aperture | |||
| Operating Temperature | 20〜30 ℃ | |||
| Cooling | contact to heatsink by customer | |||
| Line Width（FWHM） | < 0.2 nm | |||
| Warm Up Time | < 3 sec. | |||
| Operating Voltage | 1.8〜2.2 V | |||
| Operating Current | < 300 mA | |||
| Dimension | Brass Housing; 12 ±0.0/-0.1 mm（φ） x 27.5±0.5 mm（L） | |||
| ● GLM-1236 APC Series | |||
| Model | GLM-1236-01A | GLM-1236-05A | GLM-1236-10A |
| Type | 2 wires for driving voltage, withcollimation & PCB, Brass housing | ||
| Wavelength | 532 nm | ||
| Output Power | 1±0.3 mW | 5±1 mW | 10±2 mW |
| Lifetime | > 3000 hrs. | ||
| Output Mode | CW | ||
| Beam Mode | TEM00 | ||
| Beam Divergence | < 1.2 mrad | ||
| Beam Diameter | < 2 mm at aperture | ||
| Operating Temperature | 20〜30 ℃ | ||
| Cooling | contact to heatsink by customer | ||
| Line Width（FWHM） | < 0.2 nm | ||
| Warm Up Time | < 3 sec. | ||
| Operating Voltage | 3 V | ||
| Operating Current | < 300 mA | ||
| Dimension | Brass Housing; 12 ±0.0/-0.1 mm（φ） x 31.5±0.5 mm（L） |
||
| Model | GLM-1236-01B | GLM-1236-05B | GLM-1236-10B |
| Type | Battery spring, withcollimation & PCB, Brass housing | ||
| Wavelength | 532 nm | ||
| Output Power | 1±0.3 mW | 5±1 mW | 10±2 mW |
| Lifetime | > 3000 hrs. | ||
| Output Mode | CW | ||
| Beam Mode | TEM00 | ||
| Beam Divergence | < 1.2 mrad | ||
| Beam Diameter | < 2 mm at aperture | ||
| Operating Temperature | 20〜30 ℃ | ||
| Cooling | contact to heatsink by customer | ||
| Line Width（FWHM） | < 0.2 nm | ||
| Warm Up Time | < 3 sec. | ||
| Operating Voltage | 3 V | ||
| Operating Current | < 300 mA | ||
| Dimension | Brass Housing; 12 ±0.0/-0.1 mm（φ） x 29±0.5 mm（L） | ||
| ● GLM-1236 PD Series | |||
| Model | GLM-1236-01PD | GLM-1236-05PD | GLM-1236-10PD |
| Type | 3 extended pins from LD, PD inside, with collimation, No PCB, Brass housing only + 2 PD wires |
||
| Wavelength | 532 nm | ||
| Output Power | 1 mW | 5 mW | 10 mW |
| Lifetime | > 3000 hrs. | ||
| Beam Mode | TEM00 | ||
| Beam Divergence | < 1.2 mrad | ||
| Beam Diameter | < 2 mm at aperture | ||
| Operating Temperature | 20〜30 ℃ | ||
| Cooling | contact to heatsink by customer | ||
| Line Width（FWHM） | < 0.2 nm | ||
| Warm Up Time | < 30 sec. | ||
| Operating Voltage | 1.8〜2.2 V | ||
| Operating Current | < 300 mA | ||
| Dimension | Brass Housing; 12 +0.0/-0.1 mm（φ） x 31.3±0.5 mm（L） | ||
| ● GLM-2060 APD Series | |||
| Model | GLM-2060-01 | GLM-2060-05 | GLM-2060-10 |
| Type | 2 wires for driving voltage, withcollimation & PCB, Heat sink housing | ||
| Wavelength | 532 nm | ||
| Output Power | 1±0.3 mW | 5±1 mW | 10±2 mW |
| Lifetime | > 3000 hrs. | ||
| Output Mode | CW | ||
| Beam Mode | TEM00 | ||
| Beam Divergence | < 1.2 mrad | ||
| Beam Diameter | < 2 mm at aperture | ||
| Operating Temperature | 20〜30 ℃ | ||
| Cooling | air（extra cooling is needed inlong time operating） | ||
| Line Width（FWHM） | < 0.2 nm | ||
| Stability（RMS） *1 | ±10 % @ 25 ℃ | ||
| Warm Up Time | < 3 sec. | ||
| Operating Voltage | 3 V | ||
| Operating Current | < 300 mA | ||
| Dimension | Brass Housing; 20 mm（φ） x 58.5±0.5 mm（L） | ||
| ● GLM-X852 Series | ||||
| Model | GLM-C852-01A | GLM-C852-05A | GLM-P852-01A | GLM-P852-05A |
| Type | 2 wires for driving voltage with collimation & PCB, Brass housing | |||
| Wavelength | 532 nm | |||
| Average Output Power | < 1 mW | < 5 mW | < 0.5 mW | < 2.5 mW |
| Peak Output Power | NA | NA | < 1 mW | < 5 mW |
| Output Mode | CW | pulse, 100〜120 Hz | ||
| Duty Cycle | NA | 50 : 50 | ||
| Lifetime | > 3000 hrs. | |||
| Beam Mode | TEM00 | |||
| Beam Divergence | < 1.2 mrad | |||
| Polarization | 〜 3 : 1 | |||
| Beam Diameter | < 2 mm at aperture | |||
| Optimum Operating Temperature |
20〜30 ℃ | |||
| Cooling | contact to heatsink by customer | |||
| Warm Up Time | < 3 sec. | |||
| Operating Voltage | 3 V; Power source - Battery only | |||
| Operating Current | < 300 mA | Average < 200 mA, Peak < 400 mA | ||
| Housing | Brass | |||
| Dimension, Laser Head | 8 +0/-0.05 mm（φ） x 30.5±0.5 mm（L） | |||
| Dimension, PCB（mm） | 16±0.5（L）x 9±0.5（W） | 20±0.5（L）x 9±0.5（W） | ||
*1 Extra cooling is needed in long time operating.
＊仕様は予告なく変更になる場合がございます。
標準価格： お問合せにより（株）インデコの営業部 から回答致します。
Copyright（c） HC Photonics Corp., 2011