CPM-III 非冷却 LD モジュール

AC3 Series

◆ 出力 30 W
◆ シングルエミッタレーザ構成
◆ 685 μm / 0.15 NA バンドルファイバ使用
◆ 出力コネクタ AR コーティング SMA 905
◆ サーミスタ内蔵
◆ コンパクト: 3.35" x 2.73" x 0.67"
◆ MTTF > 20,000 時間
◆ アプリケーション: 産業用 DPSS レーザポンプ、材料プロセス&切断、光掘削、マーキング&プリント

spec

CPM-III 非冷却 LD モジュール

Alfalight 社の CPM-III は、Nd:YAG or Nd:YVO4 など DPSS レーザのエンドポンプに最適な、高輝度な LD モジュールです。3.35" x 2.73" x 0.67" という小型ハウジングに、サーミスタが内蔵されています。
AC3-808BW-68-301 は、温度変化による波長シフトを抑えた空冷の波長安定化(WST)レーザです。20,000 時間を超える長いライフタイムが特長です。

 
CPM-III 非冷却 LD モジュール 特性表
Model XC3-808B-38-303 XC3-808B-38-303 XC3-879CW-38-301
PDF Download Click HERE ! Click HERE ! Click HERE !
● Optical Performance - Pump
CW Optical Output Power, Pop 30 W 30 W 30 W
Center Wavelength, Operating, λc 808±3 nm 808±1.5 nm 879±1.5 nm
Spectral Shift,
over Case Temperature dλ/dT
0.26 nm/℃ 0.07 nm/℃ 0.07 nm/℃
Spectral Shift,
over Case Power dλ/dP
N/A 0.03 nm/W 0.03 nm/W
Spectral Width, FWHM, Δλ 4.0 nm 0.8 nm 0.8 nm
Locking Range over Temperature *1 N/A 15〜45 ℃ 20〜30 ℃
Locking Range over Power N/A 8〜32 W 10〜30 W
Output Fiber 685 μm / 0.22 NA bundle
Fiber Armor 3 mm Interlocked stainless Steel Tube
Connector AR Coated SMA 905
● Electrical-Optical Performance-Pump
Operating Current, Io 5.6 A(typ.) 6.5 A(typ.) 6.2 A(typ.)
Operating Voltage, Vo 11.7 V(typ.) 12.3 V(typ.) 12 V(typ.)
Operating Mode, Rs CW or pulsed CW or pulsed CW or pulsed
● Thermal Performance
Case OperatingTemperature, Tcase 0〜50 ℃ 0〜50 ℃ 15〜35 ℃
Power Dissipation *2 36 W 44 W 38 W
Power Dissipation Air-Cooled or Water-Cooled Heatsink
NOTE:
* All conditions are at 25 ℃ submount temperature and output power unless otherwise noted.
*1 Power outside of 804〜812 nm range is less than 10 % of the total power.
*2 typical at 25 ℃

*仕様は予告なく変更になる場合がございます。
標準価格: お問合せにより (株)インデコの営業部 から回答致します。

Copyright(c) Alfalight, Inc., 2011